Language: EN | BM |

BENTSAI E62P Soda Can Printing Demo with Black Fast-Drying Ink

PTS Technology's technician demonstrated the BENTSAI E62P printing on soda cans with black fast-drying ink. The recorded demonstration shows the conveyor setup, cans presented near the printing equipment and black characters visible on a silver can end. It provides a practical example for beverage businesses considering inline can coding in Malaysia.

What was used in this demonstration?

  • Printer: BENTSAI E62P, as confirmed by PTS.
  • Packaging: soda cans.
  • Ink: black fast-drying ink.
  • Activity: a PTS technician's demonstration, not a reported customer purchase or production installation.

The ink's exact formulation and cartridge model are not specified here. “Fast-drying” does not mean instant drying or universal adhesion. The demonstration does not establish a measured drying time, maximum production speed or long-term durability.

See the actual conveyor setup

The equipment is mounted alongside a conveyor. For a proposed installation, can presentation, printhead position, triggering and product spacing should be checked together. A short demonstration should not be treated as proof of unattended, full-shift production performance.

PTS and BENTSAI logos
Original video frame showing the BENTSAI E62P conveyor printing setup during a PTS demonstration
Original frame extracted from the supplied demonstration video. Model identification: PTS. No printer geometry or sample markings have been redrawn in this frame.

Close-up of the can sample

The video includes a closer view of black printed characters on the can end. The visible sample text is demonstration content; it is not a shelf-life recommendation. This image documents appearance at the time of recording, not a rub-resistance, water-resistance or chemical-resistance test.

PTS and BENTSAI logos
Original video frame showing black printed characters on the silver end of a soda can in the E62P demonstration
Original video frame at approximately 18 seconds. The source footage limits fine-text clarity; the printed characters have not been recreated.

What should a beverage packer test?

  • The actual can surface: coating, curvature and the intended print area can affect the result.
  • Surface condition: check for moisture, condensation, dust or residue. Do not assume that a setup demonstrated on one can will print successfully on a wet chilled can.
  • Drying before contact: establish the required interval before touching, packing or allowing the printed area to contact another surface.
  • Repeatability: inspect several cans at the intended operating conditions, including message placement and character completeness.
  • Relevant handling: assess the mark after the storage and handling your product actually undergoes. If washing or another treatment follows printing, test that process separately.

Frequently asked questions

Was the printer in this demonstration an E61P?

No. PTS confirmed the model as BENTSAI E62P. It should not be confused with the separate E61P abalone-can application.

Is the black ink confirmed to be solvent-based?

The information confirmed for this demonstration is black fast-drying ink. The formulation should be checked against the exact cartridge documentation rather than inferred from that description.

Does the video prove suitability for every beverage can?

No. Confirm the proposed printer and cartridge configuration and test your actual can, print position and operating conditions.

Discuss your can-coding requirements with PTS

Send a can photo or sample, your required message, the available print area, intended line speed and whether the cans are dry, chilled or exposed to condensation at the printing stage. PTS can discuss an appropriate application assessment.

Read our beverage batch-coding site-trial checklist and the separate E61P abalone-can application for additional context. These examples involve different equipment and do not imply identical results.

WhatsApp PTS: +6014-360 0265

Prepared by PTS Technology Sdn Bhd (200201019907). Source: PTS-supplied demonstration video and confirmed model, packaging and ink information. The branded cover is a designed composition; original video frames are provided in the article. No beverage-brand endorsement, customer purchase, food-contact approval or compliance certification is claimed.

18 Oct 2026

Best Thermal Inkjet Coding & Marking Printer Supplier in Malaysia

Discover why PTS TECHNOLOGY SDN BHD stands out as the best thermal inkjet coding and marking printer supplier in Malaysia. Learn about leasing printers, Bentsai inkjet solutions, and comprehensive packaging and printing services.

Explore More