Bentsai E62P TIJ Printer: High Speed Industrial Inline Marking System For Date Coding, Lot Numbers, And Barcodes On Porous & Non-Porous Surfaces Bentsai Malaysia - Exclusive Distributor & TIJ Coding Specialists Malaysia Services

Name: Bentsai E62P TIJ Printer: High Speed Industrial Inline Marking System for Date Coding, Lot Numbers, and Barcodes on Porous & Non-Porous Surfaces
Brand: BENTSAI
Availability: InStock

What is the Bentsai E62P and what industries is it designed for?

The Bentsai E62P is a high-resolution thermal inkjet coding and marking printer designed for inline conveyor production lines. It is widely used in the food and beverage, pharmaceutical, cosmetics, and manufacturing industries for printing expiry dates, batch numbers, barcodes, and GS1 codes directly onto product packaging.

What is the maximum print height of the Bentsai E62P?

The maximum print height depends on the model and printhead configuration. The E62P-1 with a single 1-inch printhead achieves up to 25.4mm. The E62P-2 with dual-plate stitching can reach up to 50.8mm. With stacked dual-controller setups, print heights of up to 100mm are achievable.

What is the maximum print resolution of the Bentsai E62P?

The E62P supports resolutions up to 600 DPI using thermal inkjet technology, delivering sharp and consistent print quality on both porous and non-porous substrates.

How fast can the Bentsai E62P print on a conveyor production line?

Using 0.5-inch cartridges at 75 DPI, the E62P can reach speeds of up to 120 metres per minute. At 300 DPI it runs at 60 metres per minute, and at 600 DPI it runs at 30 metres per minute. With 1-inch cartridges, the maximum speed is 30 metres per minute at 75 DPI.

What is the difference between water-based and solvent-based ink cartridges?

Water-based ink cartridges are suitable for porous and semi-porous materials such as paper, cardboard, corrugated boxes, wood, and textile. Solvent-based ink cartridges are designed for non-porous surfaces such as plastic, glass, metal, aluminium foil, and cables. Selecting the correct ink type ensures proper adhesion and print durability.

Can the Bentsai E62P print GS1 barcodes and QR codes?

Yes. The E62P fully supports GS1 Data Matrix, GS1 QR codes, GS1-128 barcodes, and a wide range of 1D and 2D code formats including Code 39, Code 128, EAN-8, EAN-13, UPC-A, UPC-E, ITF-14, PDF417, MaxiCode, and more. This makes it highly suitable for pharmaceutical and food traceability compliance.

Does the Bentsai E62P require compressed air or a pump to operate?

No. The E62P uses Thermal Inkjet technology, which is a self-contained cartridge-based system. It does not require external compressed air, pumps, solvent tanks, or complex fluid management, making it significantly simpler to operate than Continuous Inkjet printers.

What is the recommended ink throw distance for the printhead?

The recommended distance between the nozzle plate and the surface of the product being printed is 2mm to 5mm. Maintaining this distance ensures consistent print quality across flat, slightly uneven, and gently curved surfaces.

How many lines of text can the E62P print in one pass?

With a 12.7mm plate it prints up to 5 lines of text. With a 25.4mm plate it prints up to 10 lines. With a 50mm dual-plate setup it prints up to 20 lines. A 100mm configuration supports up to 40 lines.

What operating system does the E62P controller use?

The E62P runs on an embedded Linux operating system and is controlled through a 7-inch HD touchscreen display. The interface supports multiple languages including English, Bahasa Malaysia, Bahasa Indonesia, Chinese, Arabic, and over 30 others depending on regional configuration.

Is the Bentsai E62P suitable for food and pharmaceutical packaging lines?

Yes. The E62P is specifically optimised for GS1 coding, expiry date printing, and batch number marking required in food, beverage, pharmaceutical, and cosmetics production environments. It supports the variable data fields and traceability code formats mandated by these industries.

Can the E62P print variable data such as expiry dates, sequential batch numbers, and dynamic fields?

Yes. The system supports static text, user-editable variable fields, dynamic data inputs, automated date and time codes, and sequential batch counters. This allows fully automated date coding without operator intervention during production.

Can I connect the Bentsai E62P to my factory automation system?

Yes. The E62P controller provides a native API for integration with external automation and ERP systems. External I/O connectivity options include Ethernet and RS232 ports, allowing seamless integration with PLCs, production management software, and conveyor control systems.

How do I transfer logos, graphics, or database files into the E62P?

Images in JPG, PNG, and BMP format as well as database files can be transferred to the printer via USB disk or Ethernet connection. The 7-inch touchscreen interface allows easy file management and job selection directly on the machine.

What happens if my conveyor speed is not consistent?

For production lines with variable conveyor speeds, an optional external encoder can be connected to the E62P. The encoder synchronises the print trigger and output with the actual line speed in real time, maintaining consistent character width and print quality regardless of speed fluctuations.

Can the E62P print on bottles or other curved surfaces?

Yes, provided the curvature of the surface remains within the 2mm to 5mm ink throw distance from the printhead nozzle plate. For highly curved or irregular surfaces, adjusting product orientation or using a custom mounting bracket is recommended.

How does the built-in photocell sensor work?

The embedded photocell sensor detects each product as it passes on the conveyor and triggers the print job automatically. Separate delay settings allow fine-tuning of the print position relative to the detection point, enabling precise and repeatable placement of the printed code on each product.

Can I calculate ink consumption and printing costs with the E62P?

Yes. The E62P includes a built-in smart print cost calculator. It provides estimates based on message size, print frequency, and resolution, and includes customisable ink-saving options to help manufacturers control and reduce consumable costs over time.

Is it easy to install the E62P on an existing conveyor line?

Yes. The E62P has a compact form factor and comes with a standard optical sensor, making inline installation straightforward on both small and large production lines. The quick-start interface allows the unit to be configured and running within a short setup period.

What types of products and packaging materials can the E62P print on?

With water-based inks, it prints on paper, cardboard, corrugated boxes, wood, and fabric. With solvent-based inks, it prints on plastic bottles, glass containers, metal cans, aluminium foil, cables, and other non-porous surfaces. The correct cartridge type must be matched to the substrate.

How do I maintain the Bentsai E62P printhead to prevent clogging?

The E62P uses a replaceable cartridge-based printhead, which requires minimal maintenance. Routine cleaning involves simply wiping the nozzle plate, which takes only a few seconds. No professional servicing, solvent flushing, or scheduled downtime is required, unlike traditional Continuous Inkjet systems.

Can the Bentsai E62P replace a Continuous Inkjet printer on my production line?

Yes. The E62P is a direct alternative to Continuous Inkjet systems. It offers lower maintenance requirements, zero solvent flushing, cleaner operation, easier installation, and significantly reduced downtime. For many production environments it delivers lower total cost of ownership compared to CIJ systems.

What do the status indicator lights on the E62P mean?

The status indicator light shows three states. Green means the system is ready. Blue means the machine is actively printing. Red means an alarm condition has been detected. When the red alarm activates, the 7-inch touchscreen displays a specific diagnostic message to guide the operator in resolving the issue.

What are the storage and operating temperature requirements for the ink cartridges?

Ink cartridges should be stored at temperatures between 0 degrees Celsius and 45 degrees Celsius. The recommended working environment for the printer is between 5 degrees Celsius and 35 degrees Celsius, with a relative humidity of 10 to 80 percent.

What is the difference between the E62P-1 and E62P-2 models?

The E62P-1 is configured with a single printhead plate, suitable for applications requiring a print height of up to 25.4mm with a single 0.5-inch or 1-inch cartridge. The E62P-2 supports dual printhead plates with stitching capability, allowing print heights of up to 50.8mm and greater flexibility for wider print area applications.

What accessories are included with the E62P as standard?

Standard accessories include one USB disk, one optical sensor, one power adapter, and the respective printhead plates depending on the model. Optional accessories available separately include an external encoder, a beacon light, and an anti-shock module.

Where can I buy an authentic Bentsai E62P industrial inkjet printer in Malaysia?

PTS Technology Sdn Bhd is the authorised distributor of Bentsai industrial inkjet printers in Malaysia. Purchasing through PTS Technology ensures you receive a genuine unit backed by official warranty, certified ink cartridges, and direct manufacturer support. Visit ptstsb.com or contact the PTS team to enquire.

Is local technical support and warranty service available in Malaysia?

Yes. As the authorised Bentsai distributor in Malaysia, PTS Technology provides local technical support, official warranty coverage, and access to genuine spare parts and replacement cartridges. This eliminates reliance on international shipping or unofficial service channels.

Can I purchase replacement ink cartridges locally in Malaysia to avoid production delays?

Yes. PTS Technology maintains local inventory of both water-based and solvent-based Bentsai ink cartridges in Malaysia. Local stock availability ensures fast replenishment and minimises production downtime caused by cartridge supply delays.

What is the purpose of the Bentsai E62 Industrial Inkjet Printer?

The printer is designed for industrial inkjet coding and marking.

What are the key features of the Bentsai E62 Industrial Inkjet Printer?

The Bentsai E62P Series offers flexibility with options for either a single or dual printhead, allowing compatibility with 0.5" or 1" inkjet cartridges. It features thermal inkjet technology to achieve high-resolution printing up to 600 dpi and speeds up to 120 meters per minute.

What are the benefits of using the Bentsai E62 Industrial Inkjet Printer?

The printer offers high-resolution printing, compatibility with various inkjet cartridges, and a user-friendly 7-inch controller for easy operation and maintenance.

What are the specifications of the Bentsai E62 Industrial Inkjet Printer?

The printer weighs [weight], measures [length] x [width] x [height].

What is the brand of the Bentsai E62 Industrial Inkjet Printer?

The printer is manufactured by BENTSAI.

What is the purpose of the Bentsai E62 Industrial Inkjet Printer?

The printer is designed for industrial inkjet coding and marking.

Display	7＂HD Touch Screen
Operation System	LINUX System
System Languages	English / German / French / Italian / Spanish / Portuguese / Slovenian / Serbo-Croatian / Czech / Bulgarian / Romanian / Polish / Greek / Hungarian / Russian / Ukrainian / Slovak / Arabic / Persian / Turkish / Chinese / Traditional-Chinese / Japanese / Korean / Hindi / Thai / Vietnamese / Indonesian / Burmese / Hebrew (Available languages vary for different regions)
Embedded Memory	8G
Status Alarm	Green: Ready \| Blue: Printing \| Red: Alarm
Working Environment	Storage: 0℃-45℃ \| Working: 5℃-35℃ \| Humidity: 10%-80%
Application Mode	INLINE
I/O Ports	Ethernet, USB, Photocell, Encoder, Beacon
External Power Adapter	IN: 100-240V / OUT: DV24V 4A
Accessories	Standard : USB Disk 1, Optical Sensor1, Power Adapter*1, Printhead plates ( varies on models, see model list below) Optional: Encoder, Beacon, Anti-shock module

Gray Level	10 Levels: 10%-100%
Message Components	Text, Numbers, lmages, Logo, Barcodes, Dates, Counter, Database, Dynamic Data etc.
Image Format	JPG, JPEG, PNG,BMP
2D Code Formats	OR Code, Date Matrix, PDF417, Grid Matrix, GS1 DM, GS1 QR, Truncated PDF417, Maxi Code, MicroPDF417
Barcode Formats	Code 39, Code 128, Code128-B, EAN-8 , EAN-13, UPC-A, UPC-E, ITF 2 of 5 , ITF-14, Code 93, GS1-128, GS1 DataBar Truncated, GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Extended, GS1 DataBar Stacked, GS1 DataBar Stacked Omni, GS1 DataBar Expanded Stacked, Matrix 2 of 5, Industrial 2 of 5, lATA 2 of 5, Data Logic 2 of 5, Interleaved 2 of 5
Fonts	True type fonts, Dot-matrix fonts
Printable Materials	Water-based ink for porous and semi-porous substrates: Paper / Corrugated box / Wood / Fiberboard / Textile and etc. Solvent-based ink for semi-porous and non porous substrates: Plastic / Glass / Metal plate / Alu-foil / Cable and etc.
Ink Throw Distance	2mm-5mm (Distance between nozzle plate and print object)
Ink Cartridges Colors	Water-based Color options: Black, Cyan, Magenta, Yellow, Green Solvent-based Color options: Black, Cyan, Magenta, Yellow, White, Green
Resolution	X-direction DPI: 75/100/150/200/300/600/1200 Y-direction DPI: 300/600 (0.5＂cartridges) X-direction DPI: 75/100/150/200/300/600/1200 Y-direction DPI: 300 (1＂cartridges)
Max Print Height	12.7mm (1-5 lines) /25.4mm (1-10 lines) /50mm (1-20 lines) /100mm (1-40 lines)
Max Print Length	2100mm
Max Print Speed	0.5＂Printhead: 30m/minute@600dpi 60m/minute@300dpi 120m/minute@75dpi 1＂Printhead: 15m/minute@300dpi 30m/minute@75dpi

Model Name	E62P-1	E62P-2
Printhead Plates	12.7mm Single-Plate1 25.4mm Single-Plate1	12.7mm Single-Plate2 12.7mm Dual-Plate1 25.4mm Single-Plate2 25.4mm Dual-Plate1
Gross Weight	5790g	7850g
Packaging Size	Carton 1: 465mm172mm365mm	Carton 1: 470mm172mm365mm Carton 2: 360mm100mm240mm